Supply & Fit
A complete driveway gate that opens automatically, never rusts, and needs no repainting.
Getting It Right
Fitting a swing gate where there is insufficient driveway depth means the gate strikes a parked car or cannot open fully.
Opening width, side space, and slope are measured at survey stage before any gate type is specified or ordered.
Posts set without proper foundations shift over time, pulling the gate out of alignment and straining the motor.
Post foundations and groundwork are quoted and carried out as part of the same installation, not left to the customer.
A powered gate without safety edges or photocells fails machinery safety requirements and creates a serious entrapment risk.
Safety edges and photocells are specified to DHF and Gate Safe standards and tested before the gate is commissioned.
Electrical work not carried out to Part P requirements leaves a domestic installation non-compliant and potentially uninsurable.
All wiring on domestic installations is completed to Part P requirements, with the finished work meeting current regulations.
Scope of Work
Every job is arranged as a single scope, gate, automation, wiring, and commissioning together.
Two gate leaves hung on set posts with ram-arm or underground operators, suited to standard residential driveway openings.
A single leaf running on a ground track, suited to wider openings or entrances where swing clearance is limited.
Posts set in concrete foundations with positions confirmed at survey, ensuring the gate hangs true and the motor is not overloaded.
Opener, control box, and remote fobs supplied and wired as part of the same job, no separate automation contractor needed.
Photocells and safety edges aligned, tested, and signed off before handover so the gate meets machinery safety requirements from day one.
Colour-matched coating applied before delivery.
Access control added to the same installation scope.
Emergency manual override fitted and tested at commissioning.
Why Choose Us
We arrange local installers who survey the entrance, specify the right system, and quote groundwork and wiring as one complete scope.
Gate, posts, motor, wiring, and commissioning are quoted together, no separate contractors to coordinate.
A local installer visits first to confirm gate type, post positions, and cable routes before any materials are specified.
Safety edges and photocells are specified to DHF and Gate Safe standards on every powered gate installation.
All domestic wiring is completed to Part P requirements, keeping the installation compliant and the property insurable.
Gate leaves are made to the measured entrance width, so no adapting the driveway to fit an off-the-shelf size.
How It Works
01
Tell us the opening width, slope, and access needs and we arrange a local installer to survey and quote the full job.
02
The installer visits, confirms swing or sliding configuration, and quotes gate leaves, posts, wiring, and groundwork together.
03
Gate, motor, sensors, and wiring are fitted in one visit, tested to machinery safety standards, and handed over ready to use.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Simple aluminium gate | £1300-£3500 |
| Aluminium swing gate pair | £2500-£6000 |
| Fully automated aluminium gate | £3500-£8000 |
| Bespoke aluminium driveway gate | £5000-£12000 |
Describe the width, slope, and access needs and we’ll arrange a local installer to survey and quote the full job.