Wooden & Timber Electric Gates Questions

Often yes, if the gate is sound and the posts and hinges can carry the extra load. The survey checks for sagging, damage, and whether the gate opens and closes freely. If the timber is beyond repair, a treated hardwood replacement leaf is specified instead.

Sticking usually points to alignment problems, hinge wear, or post movement. Those issues are corrected before the motor is fitted, adding automation to a gate that already binds will cause the motor to fail early and the fault to return.

Timber does need periodic treatment to stay stable, particularly in damp conditions. The wood species and treatment specified at installation affect how much attention is needed. A correctly treated and properly hung gate will not require constant maintenance.

The survey measures the swing arc against the available space, including any slope, parked cars, or walls. If the clearance is too tight, the installer will advise on the layout before any work is committed to.

Yes. Fixed wiring for gate automation in a domestic property falls under Part P of the Building Regulations. All electrical work we arrange is carried out to Part P requirements, and documentation is provided on completion.

A gate that already sags or sticks will put constant strain on any motor fitted to it, shortening the motor’s life and causing unreliable operation. The longer the structural problem is left, the more remedial work is likely to be needed before automation can proceed.